Category Installation & User Manual

BATTLEFALCON DUAL-PURPOSE COMPOUND BOW USER MANUAL BattleFalcon Dual-Purpose Compound Bow User Manual

These two screws can be used to adjust the Y-fork left and right. The pull cord clamp can be fixed to the buss cable. The pull cord can lift the Y-fork of the arrow rest. After adjusting the pull cord…

LM1 INSTALLATION MODULE The holes on the night vision sight bracket can be used to adjust the mounting position of the night vision sight. Magazine, spacer, mounting plate, and mounting screws Release aid, slider, and mounting bracket Release aid, slider,…

ALL MODULES FOR THE DX2 NIGHT VISION, MAGAZINE, AND AIMING ANCHOR GUIDE ROD The screw holes on this bracket can be used to adjust the position of the night vision sight. Magazine Mounting Module Aiming Anchor Rod Bow Mounting Module…

19K 6-Shot Arrow Magazine Module This is the arrow retaining rod. This is the arrow magazine. This is the arrow magazine pulley bracket module. These two movable blocks can clamp different bow shapes. These two screws can be adjusted to…

Slide Rail Connecting the Bow Riser and Magazine Bow Riser-to-Magazine Slide Rail These two screws can be moved to adjust the distance between the magazine and the bow riser, so that the bowstring stays centered in the magazine’s string groove…

AR16 / AR16A Video Tutorial

Slide the lever into the slot to load the steel ball. Push the magazine forward fully until you hear a “click” — this means the steel ball is chambered and the bowstring is locked. Pull the bowstring back and hold…

Installation Video F20 STEEL BALL REPEATING BOW NIGHT VISION USER MANUAL Push the steel ball pusher to this position. Load the steel balls, size 12/13 mm. Release the pusher rod. Press the ball loader to push the steel ball into…

Video Tutorial